Product Overview

The Miami Fresh High Sleeper offers a lofted design‚ elevating your mattress for extra storage. It features a sturdy steel frame‚ adjustable rails‚ and a sleek blue finish. Ideal for small spaces‚ it combines comfort with practical space-saving functionality!!

Features & Specifications

Sturdy steel frame‚ adjustable rails‚ lofted design‚ 2‑ft clearance‚ blue finish‚ 72” width‚ 80” length‚ 12” height‚ mattress up to 14” thick‚ storage drawers‚ easy assembly‚ durable hardware‚ energy‑efficient. – 2026 model – 2

Dimensions & Capacity

The Miami Fresh High Sleeper is engineered to fit standard mattress sizes while maximizing storage. The overall footprint measures 72 inches wide‚ 80 inches long‚ and 12 inches tall‚ providing a generous lofted area for a queen‑size mattress. The clearance beneath the bed is 24 inches‚ allowing easy access to the storage drawers and a comfortable walking space.

Capacity is a key selling point: the frame supports mattresses up to 14 inches thick‚ ensuring compatibility with most memory‑foam and hybrid options. The built‑in storage system includes two side drawers‚ each 18 inches deep‚ 12 inches high‚ and 20 inches wide‚ offering ample room for linens‚ seasonal clothing‚ or bedding accessories. The total storage volume is approximately 1‚200 cubic inches.

Weight limits are generous; the steel construction can hold up to 400 pounds of combined mattress and bedding weight without compromising structural integrity. The frame’s reinforced corners and cross‑beams distribute load evenly‚ preventing sagging over time. For added safety‚ the sleeper includes a locking mechanism on each drawer to keep contents secure during transit or accidental movement.

After assembly‚ place the mattress on the lofted platform and secure the top rail. Slide the drawers into the tracks‚ lock them‚ and test the bed for stability. Check to maintain safety. OK

Mattress Compatibility

The Miami Fresh High Sleeper is engineered to support a wide array of mattress types‚ from memory‑foam and latex to hybrid and innerspring models. Its lofted platform accommodates standard single‚ double‚ queen‚ and king mattresses‚ with a maximum thickness of 14 inches. The steel frame delivers a firm base that prevents sagging‚ while the cross‑beams provide additional reinforcement for heavier hybrids. Adjustable rails allow users to fine‑tune the loft height‚ ensuring optimal comfort and weight distribution. The sleeper’s weight capacity of 400 pounds includes the mattress and bedding‚ making it suitable for most households. A padded mattress guard protects against scratches and moisture‚ extending the mattress’s lifespan. The sleek blue finish complements modern bedroom décor‚ and the adjustable rails can be locked to maintain a consistent loft. Optional accessories‚ such as a built‑in USB charger or decorative headboard‚ can be added for extra convenience and style. Overall‚ the Miami Fresh High Sleeper offers versatile mattress compatibility‚ robust support‚ and customizable features that meet a variety of sleeping preferences and storage needs and comfort daily. Users can also customize the sleeper with optional accessories such as a built‑in USB charger or a decorative headboard‚ further enhancing both functionality and style.

Parts & Tools Checklist

Frame: 4 steel posts‚ 2 cross‑beams‚ 4 adjustable rails‚ 1 mattress guard. Tools: 1 Phillips screwdriver‚ 1 socket set‚ 1 wrench‚ 1 measuring tape‚ 1 level‚ 1 rubber mallet. All items listed in the box. Follow the manual for assembly. All parts are pre‑drilled

Frame Components

Each high sleeper frame is engineered for durability and ease of assembly. The core structure consists of four heavy‑gauge steel posts‚ each 3.5 in. in diameter. Two cross‑beams run horizontally‚ bolted to the posts with lock nuts to prevent wobble. Adjustable rails‚ 1.25 in. thick‚ attach to the posts via sliding brackets‚ allowing the sleeper height to be customized between 24 in. and 36 in. A reinforced mattress guard‚ 1 in. thick‚ sits atop the rails to protect the mattress from scratches and moisture. All fasteners are pre‑drilled and labeled for quick identification. The frame also includes a removable side panel‚ made of lightweight aluminum‚ that can be swapped for a storage drawer or left open for airflow. The design complies with the latest safety standards‚ featuring rounded edges and a weight capacity of 250 lb. Assembly requires no special tools beyond the standard kit supplied‚ ensuring a straightforward setup for any user.

The adjustable rails are inserted into the brackets and tightened with the supplied Allen keys. Once the rails are set‚ the mattress guard is slid over the rails‚ securing it with a set of small screws. The entire process takes roughly 30 minutes‚ and the finished frame provides a stable‚ level surface for the mattress in any room and today.

Essential Tools

To assemble the Miami Fresh High Sleeper efficiently‚ gather the following items:

• 1 × 10‑inch adjustable wrench (for tightening lock nuts on the frame posts)
• 1 × Phillips head screwdriver (for securing the mattress guard screws)
• 1 × Allen key set (1/4‑in.‚ 3/8‑in.‚ 1/2‑in.) to lock the adjustable rails into place
• 1 × cordless drill with 1/4‑in. drill bit (for pre‑drilling any optional storage drawer)
• 1 × level (to ensure the sleeper sits flat on the floor)
• 1 × tape measure (to confirm correct rail height before final tightening)
• 1 × utility knife (for trimming any excess protective film on the frame)
• 1 × work gloves (to protect hands during assembly)
• 1 × clean rag (for wiping dust off the frame before final inspection)

The frame’s modular design allows for easy customization‚ enabling users to adjust rail positions or replace side panels with storage solutions. All fasteners are pre‑drilled‚ eliminating the need for drilling during assembly!!!

All tools are readily available at most hardware stores or can be borrowed from a neighbor. Using the correct tool for each fastener not only speeds up the process but also ensures the sleeper remains stable and safe for everyday use.

Preparation Steps

Before assembly‚ clear a flat 4‑by‑6 ft area. Lay a drop cloth‚ then lay out all parts on the floor. Verify the frame kit matches the listed model. Keep the instruction manual handy‚ and have the tools ready for a smooth build. Ensure level floor and no debris.

Workspace & Safety

Before you begin‚ choose a spacious‚ level area free of clutter. A 5‑by‑7 ft zone is ideal for maneuvering the high sleeper frame. Lay a protective drop cloth or plywood sheet to shield the floor from dents and scratches. Ensure the surface is clean‚ dry‚ and free of loose debris that could impede movement or damage the frame.

Gather all tools: a 10‑inch socket set‚ a 3‑inch Allen key‚ a torque wrench‚ a rubber mallet‚ and a flashlight for visibility. Keep a small bucket of water and a sponge nearby to clean accidental spills or dust. Place a sturdy workbench or table within reach for temporary storage of components.

Wear appropriate safety gear: non‑slip shoes‚ gloves to protect your hands‚ and eye protection if you anticipate dust or debris. Keep a fire extinguisher within arm’s reach‚ especially if you’re working near electrical outlets or in a confined space. Verify that the area has adequate ventilation to avoid inhaling dust or fumes from any lubricants used during assembly.

Check the structural integrity of the floor joists or support beams. The high sleeper requires a minimum load capacity of 250 lbs per joist. If unsure‚ consult a structural engineer or use a floor leveler to confirm the floor can support the assembled unit. Avoid assembling over fragile or uneven flooring.

Finally‚ read the entire instruction manual before starting. Familiarize yourself with the sequence of steps‚ the torque specifications‚ and the safety warnings. This preparation phase ensures a smooth build and reduces the risk of injury or damage to the product.

• Confirm the area is free of pets or children.
• Ensure all power cords are unplugged.
• Mark the floor with tape to indicate where the frame will sit.
• Keep a first‑aid kit within reach.

Maintain ambient temperature between 65°F and 75°F during assembly to prevent metal parts from expanding or contracting excessively. Avoid assembling in high humidity‚ which can cause rust on steel components. If the room is too cold‚ allow the frame to acclimate for at least 30 minutes before starting.

Assembly Instructions

Start by attaching side rails to the central support with bolts‚ tightening to 12 Nm. Slide mattress rails in‚ secure with screws‚ then lift the mattress onto the frame. Tighten all fasteners and test stability. Check bolt tightness!

Build Base & Support

Begin by laying out the four corner posts on a flat‚ level surface. Each post is 4 inches square and 36 inches tall‚ made from powder‑coated steel for durability. Attach the posts to the base plate using the supplied 4‑inch lag screws‚ tightening each to 15 Nm with a torque wrench. Ensure the plate is centered on the posts‚ aligning the pre‑drilled holes. Next‚ secure the cross‑beams that run horizontally between the posts. These beams are 2 inches thick and 30 inches long. Insert the provided metal brackets into the beam ends‚ then bolt them to the posts with 3‑inch lag screws‚ again tightening to 15 Nm. Once the frame is upright‚ place the adjustable mattress rails onto the cross‑beams. Slide each rail into its slot‚ lock the latch‚ and tighten the securing screws to 10 Nm. Finally‚ test the stability by gently rocking the frame; any wobble indicates a loose screw that must be re‑tightened. This completes the base and support assembly‚ ready for mattress installation. To ensure longevity‚ periodically check all bolts for tightness‚ replace any worn washers‚ and apply a light coat of silicone sealant to the joints to prevent dust ingress. Store the mattress in a cover when not in use‚ and rotate it every 6 months to maintain wear. This proactive care extends the sleeper’s lifespan and keeps the frame looking new. Additionally‚ keep the frame away from direct heat sources and avoid placing heavy objects on top to preserve the structural integrity over time for several years and more

Attach Rails & Tighten

Position the adjustable rails onto the cross‑beams of the base frame. Each rail is 28 inches long and has a recessed slot for the locking pin. Slide the rail into the slot‚ align the pin with the notch‚ insert the pin‚ and secure it with the supplied nylon key. Tighten the four 3‑inch lag screws per rail to 12 Nm with a torque wrench. Verify even tightening to prevent wobble. Run a straight edge along each rail to confirm parallel alignment; if a rail deviates‚ loosen the screws‚ realign‚ and retighten. Inspect the locking pins for smooth operation; they should slide freely. Apply a thin layer of silicone lubricant to the pin threads to reduce friction during adjustments. Perform a load test by placing a weight equal to the mattress on the rails and checking for play; if movement occurs‚ repeat tightening. Document the torque settings in the assembly log. Additionally‚ check the base plate for burrs or sharp edges that could damage the mattress; file them if present. For durability‚ replace worn washers after every 12 months of use. Store the sleeper in a dry area to avoid corrosion. Remember to double‑check all torque values before finalizing the build to avoid maintenance issues! Ensure that the rails are positioned at least 2 inches above the floor to allow for proper ventilation and prevent moisture buildup. After tightening‚ perform a quick visual inspection to confirm all fasteners are flush and no gaps are visible. All steps should be completed in a well‑ventilated area.

Troubleshooting Common Issues

Loose screws? Tighten all lag bolts to 12 Nm. Misaligned rails? Re‑align‚ then retighten. Noisy frame? Apply silicone to pins. Sagging mattress? Check rail height and adjust. If still unstable‚ contact support. Contact help.!!

Loose Fasteners & Alignment

When assembling the Miami Fresh High Sleeper‚ the most common issues arise from improperly tightened fasteners or misaligned rails. Follow these steps to ensure a secure‚ level frame:

• Check all lag bolts: Use a torque wrench set to 12 Nm. Tighten each bolt in a criss‑cross pattern.
• Inspect screw heads: Replace any stripped or worn screws with the same size. A new screw can prevent future loosening.
• Align the side rails: Place the rails on the frame and verify that the mounting holes line up. If a rail sits off‚ the brackets before tightening.
• Secure the top rail: After the side rails are level‚ fasten the top rail. Tighten all fasteners to avoid warping.
• Use thread‑locking compound: Apply a small amount to all screw threads before final tightening to lock them in place.
• Re‑check after settling: Once the mattress is installed‚ let the sleeper sit for 24 hours. Re‑inspect all fasteners.

All connections secure.

Align!

By following these detailed steps‚ you can eliminate wobble‚ reduce noise‚ and extend the sleeper’s lifespan. If problems persist‚ contact the manufacturer’s support line for further assistance.

Ok!

Care & Maintenance

Regularly dust the frame with a soft cloth‚ wipe the mattress area with a mild cleaner‚ inspect bolts monthly‚ tighten if needed‚ rotate mattress every 6 months‚ and store in a dry‚ ventilated space to prevent mold.and keep it drynow

Cleaning & Inspection

Begin by removing any loose debris from the frame and mattress area with a soft brush or vacuum. Use a damp microfiber cloth and a mild‚ pH‑neutral cleaner to wipe steel surfaces‚ ensuring no residue remains. Inspect all bolts‚ screws‚ and hinges for tightness; tighten with a Phillips screwdriver if any looseness is detected. Check the mattress support slats or platform for cracks or warping; replace any damaged components promptly. Examine the upholstery or fabric for stains‚ and spot‑clean with a gentle detergent solution‚ avoiding excessive moisture that could seep into the frame. Periodically rotate the mattress 180° to promote even wear. Inspect the floor clearance beneath the sleeper for any obstructions or damage‚ and keep the area clear of sharp objects that could puncture the mattress. Finally‚ perform a visual check of the overall structure‚ ensuring no rust spots or paint flaking; apply a protective coating if necessary to extend the sleeper’s lifespan. For long‑term protection‚ consider installing a removable mattress protector that can be washed separately‚ and schedule a deep clean of the frame every six months to prevent dust buildup. If you notice any signs of rust or corrosion‚ immediately clean the affected area with a mild rust remover and re‑apply a protective sealant to maintain the frame’s integrity. Keep it dry. !

Shipping & Returns

Our high sleeper ships in reinforced cardboard boxes with protective foam. Delivery takes 5–7 business days. Returns accepted within 30 days if product is unused. Warranty covers manufacturing defects for 2 years. Contact support for claims. Shipping insurance. 5%..!!

Packaging & Warranty

Each Miami Fresh High Sleeper is shipped in a reinforced cardboard crate with foam inserts that lock the frame‚ rails‚ and mattress support in place. The crate includes a protective film for the steel frame and a moisture‑resistant sleeve for the mattress options. A quick‑start guide‚ spare screws‚ and a small tool kit are also provided for immediate assembly. Shipping insurance covers loss or damage up to the full value of the sleeper. Returns are accepted within 30 days of receipt if the product is unused and in its original condition. A 2‑year limited warranty protects against manufacturing defects in the frame‚ rails‚ and hardware‚ but does not cover normal wear‚ improper installation‚ or damage caused by external forces. Warranty claims must be filed within the warranty period and include the original receipt and a photo of the product. All claims must be submitted in writing with a detailed description and photos to expedite processing promptly For assistance‚contact support.